一， /boot分區備份
二，網絡配置
修改主機名：
#vi /etc/sysconfig/network
NETWORKING=yes
#HOSTNAME=localhost.localdomain
HOSTNAME=CentOS-1
#也可以在這里設置網關
#GATEWAY=192。168.30.1
設置網絡為DHCP獲取
vi /etc/sysconfig/network-scrip/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="dhcp"
HWADDR="08:00:27:A7:AB:97"
NM_CONTROLLED="no"
ONBOOT="no"
TYPE="Ethernet"
UUID="9622f9e1-6218-4c56-9f45-7ae29b477e89"
設置靜態IP
vi /etc/sysconfig/network-scrip/ifcfg-eth0
[root@CentOS-3 ssh]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
HWADDR=08:00:27:e2:62:9b
NM_CONTROLLED=no
ONBOOT=yes
TYPE=Ethernet
IPADDR=192.168.30.223
NETMASK=255.255.255.0
GATEWAY=192.168.30.1
DNS=8.8.8.8
USERCTL=no
IPV6INIT=no
三，安裝wget工具
yum install wget
四，源配置
cd /etc/yum.repos.d
mv CentOS-Base.repo bak-CentOS-Base.repo
wget http://mirrors.163.com/.help/CentOS6-Base-163.repo
yum clean all
yum makecache
五，ssh密鑰配置
https://www.jb51.net/os/RedHat/63316.html
六，sudo配置
七，編譯環境和工具的安裝
yum groupinstall "Development Libraries" "Development Tools"
