Gtid + Mha +Binlog server配置：
1：測試環境
OS：CentOS 6.5
Mysql：5.6.28
Mha：0.56
192.168.1.21 mysql1 M1
192.168.1.22 mysql2 S1
192.168.1.23 mysql3 S2 Mha manage、Binlog server
2：配置/etc/my.cnf相關參數,在3各節點中分別配置
binlog-format=ROW
log-slave-updates=true
gtid-mode=on
enforce-gtid-consistency=true
master-info-repository=TABLE
relay-log-info-repository=TABLE
sync-master-info=1
slave-parallel-workers=2
binlog-checksum=CRC32
master-verify-checksum=1
slave-sql-verify-checksum=1
binlog-rows-query-log_events=1
設置root密碼，創建復制用戶：
mysql> use mysql;
mysql> GRANT ALL PRIVILEGES ON *.* TO root@"%" IDENTIFIED BY "oracle123";
mysql> update user set Password = password('oracle123') where User='root';
mysql> flush privileges;
mysql> GRANT replication slave ON *.* TO 'repl'@'%' identified by 'oracle';
mysql> flush privileges;
3：在mysql2、mysql3配置Gtid復制
CHANGE MASTER TO
MASTER_HOST = '192.168.1.21',
MASTER_PORT = 3306,
MASTER_USER = 'repl',
MASTER_PASSWORD = 'oracle',
MASTER_AUTO_POSITION = 1;
start slave;
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.1.21
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000003
Read_Master_Log_Pos: 524
Relay_Log_File: mysql-relay-bin.000002
Relay_Log_Pos: 734
Relay_Master_Log_File: mysql-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
......
Master_SSL_Crlpath:
Retrieved_Gtid_Set: 9ee7c7af-cbf3-11e5-bf75-000c2923e459:1-2
Executed_Gtid_Set: 9ee7c7af-cbf3-11e5-bf75-000c2923e459:1-2
Auto_Position: 1
1 row in set (0.00 sec)
4：安裝Mha
rpm -Uvh epel-release-6-8.noarch.rpm
配置SSH等效：
在所有節點都執行
ssh-keygen -t rsa
ssh-copy-id -i /root/.ssh/id_rsa.pub root@mysql1
ssh-copy-id -i /root/.ssh/id_rsa.pub root@mysql2
ssh-copy-id -i /root/.ssh/id_rsa.pub root@mysql3
測試ssh登錄，在3各節點分別測試：
ssh myqsl1
ssh myqsl2
ssh myqsl3
binlog server配置：在mysql3
mkdir -p /mysql/backup/binlog
/usr/local/mysql/bin/mysqlbinlog -R --raw --host=192.168.1.20 --user='root' --password='oracle123' --stop-never mysql-
bin.000003
最后那個binlog文件時給定從那個binlog文件開始。另外需要注意，當mysql1上的mysql進程退出后，binlog server也會退出。
需要安裝一些包做支持，使用yum網絡源；如安裝遇到問題可以嘗試yum update更新yum源或yum clean all清除緩存
在每個節點安裝 mha4mysql-node
yum -y install perl-DBD-MySQL ncftp
rpm -Uvh mha4mysql-node-0.56-0.el6.noarch.rpm
在mysql3上安裝mha-manager
yum install perl
yum install cpan
yum install perl-Config-Tiny
yum install perl-Time-HiRes
yum install perl-Log-Dispatch
yum install perl-Parallel-ForkManager
如果安裝perl-Log-Dispatch，perl-Parallel-ForkManager安裝包報錯：
需要先安裝epel(可以參考https://fedoraproject.org/wiki/EPEL）
rpm -Uvh mha4mysql-manager-0.56-0.el6.noarch.rpm
5：配置Mha,在mysql3
mkdir -p /etc/masterha/app1
vi /etc/masterha/app1.cnf
[server default]
user=root
password=oracle123
manager_workdir=/etc/masterha/app1
manager_log=/etc/masterha/app1/manager.log
remote_workdir=/etc/masterha/app1
ssh_user=root
repl_user=repluser
repl_password=oracle
ping_interval=3
master_ip_failover_script=/etc/masterha/app1/master_ip_failover
[server1]
hostname=192.168.1.21
#ssh_port=9999
master_binlog_dir=/mysql/logs
check_repl_delay=0 #防止master故障時候，切換時slave有延遲，可在那里切不過來
candidate_master=1
[server2]
hostname=192.168.1.22
#ssh_port=9999
master_binlog_dir=/mysql/logs
candidate_master=1
[server3]
hostname=192.168.1.23
#ssh_port=9999
master_binlog_dir=/mysql/logs
no_master=1
ignore_fail=1 #如果這個節點掛了，mha將不可用，加上這個參數slave掛了一樣可以用
[binlog1] #binlog server需要mysqlbinlog命令
hostname=192.168.1.23
master_binlog_dir=/mysql/backup/binlog #讀取binlog存放位置
ignore_fail=1
no_master=1
vi /etc/masterha/app1/master_ip_failover
#!/usr/bin/env perl
use strict;
use warnings FATAL => 'all';
use Getopt::Long;
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
my $vip = '192.168.1.20';#Virtual IP
my $gateway = '192.168.1.1';#Gateway IP
my $interface = 'eth0';
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig $interface:$key $vip;/sbin/arping -I $interface -c 3 -s $vip $gateway >/dev/null 2>1";
my $ssh_stop_vip = "/sbin/ifconfig $interface:$key down";
GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
);
exit main();
sub main {
print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
if ( $command eq "stop" || $command eq "stopssh" ) {
# $orig_master_host, $orig_master_ip, $orig_master_port are passed.
# If you manage master ip address at global catalog database,
# invalidate orig_master_ip here.
my $exit_code = 1;
eval {
print "Disabling the VIP on old master: $orig_master_host \n";
stop_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
# all arguments are passed.
# If you manage master ip address at global catalog database,
# activate new_master_ip here.
# You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
eval {
print "Enabling the VIP - $vip on the new master - $new_master_host \n";
start_vip();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
`ssh $ssh_user\@$orig_master_host \" $ssh_start_vip \"`;
exit 0;
}
else {
usage();
exit 1;
}
}
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --
orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}
chmod 777 /etc/masterha/app1/
配置文件測試：
# masterha_check_ssh --conf=/etc/masterha/app1.cnf
Thu May 26 23:25:35 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Thu May 26 23:25:35 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Thu May 26 23:25:35 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Thu May 26 23:25:35 2016 - [info] Starting SSH connection tests..
Thu May 26 23:25:35 2016 - [debug]
Thu May 26 23:25:35 2016 - [debug] Connecting via SSH from root@192.168.1.21(192.168.1.21:22) to root@192.168.1.22(192.168.1.22:22)..
Thu May 26 23:25:35 2016 - [debug] ok.
Thu May 26 23:25:35 2016 - [debug] Connecting via SSH from root@192.168.1.21(192.168.1.21:22) to root@192.168.1.23(192.168.1.23:22)..
Thu May 26 23:25:35 2016 - [debug] ok.
Thu May 26 23:25:36 2016 - [debug]
Thu May 26 23:25:35 2016 - [debug] Connecting via SSH from root@192.168.1.22(192.168.1.22:22) to root@192.168.1.21(192.168.1.21:22)..
Thu May 26 23:25:35 2016 - [debug] ok.
Thu May 26 23:25:35 2016 - [debug] Connecting via SSH from root@192.168.1.22(192.168.1.22:22) to root@192.168.1.23(192.168.1.23:22)..
Thu May 26 23:25:36 2016 - [debug] ok.
Thu May 26 23:25:36 2016 - [debug]
Thu May 26 23:25:36 2016 - [debug] Connecting via SSH from root@192.168.1.23(192.168.1.23:22) to root@192.168.1.21(192.168.1.21:22)..
Thu May 26 23:25:36 2016 - [debug] ok.
Thu May 26 23:25:36 2016 - [debug] Connecting via SSH from root@192.168.1.23(192.168.1.23:22) to root@192.168.1.22(192.168.1.22:22)..
Thu May 26 23:25:36 2016 - [debug] ok.
Thu May 26 23:25:36 2016 - [info] All SSH connection tests passed successfully.
#masterha_check_repl --conf=/etc/masterha/app1.cnf
Thu May 26 22:52:30 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Thu May 26 22:52:30 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Thu May 26 22:52:30 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Thu May 26 22:52:30 2016 - [info] MHA::MasterMonitor version 0.56.
Thu May 26 22:52:31 2016 - [info] GTID failover mode = 1
Thu May 26 22:52:31 2016 - [info] Dead Servers:
Thu May 26 22:52:31 2016 - [info] Alive Servers:
Thu May 26 22:52:31 2016 - [info] 192.168.1.21(192.168.1.21:3306)
Thu May 26 22:52:31 2016 - [info] 192.168.1.22(192.168.1.22:3306)
Thu May 26 22:52:31 2016 - [info] 192.168.1.23(192.168.1.23:3306)
Thu May 26 22:52:31 2016 - [info] Alive Slaves:
Thu May 26 22:52:31 2016 - [info] 192.168.1.22(192.168.1.22:3306) Version=5.6.28-log (oldest major version between slaves) log-bin:enabled
Thu May 26 22:52:31 2016 - [info] GTID ON
Thu May 26 22:52:31 2016 - [info] Replicating from 192.168.1.21(192.168.1.21:3306)
Thu May 26 22:52:31 2016 - [info] Primary candidate for the new Master (candidate_master is set)
Thu May 26 22:52:31 2016 - [info] 192.168.1.23(192.168.1.23:3306) Version=5.6.28-log (oldest major version between slaves) log-bin:enabled
Thu May 26 22:52:31 2016 - [info] GTID ON
Thu May 26 22:52:31 2016 - [info] Replicating from 192.168.1.21(192.168.1.21:3306)
Thu May 26 22:52:31 2016 - [info] Not candidate for the new Master (no_master is set)
Thu May 26 22:52:31 2016 - [info] Current Alive Master: 192.168.1.21(192.168.1.21:3306)
Thu May 26 22:52:31 2016 - [info] Checking slave configurations..
Thu May 26 22:52:31 2016 - [info] read_only=1 is not set on slave 192.168.1.22(192.168.1.22:3306).
Thu May 26 22:52:31 2016 - [info] read_only=1 is not set on slave 192.168.1.23(192.168.1.23:3306).
Thu May 26 22:52:31 2016 - [info] Checking replication filtering settings..
Thu May 26 22:52:31 2016 - [info] binlog_do_db= , binlog_ignore_db=
Thu May 26 22:52:31 2016 - [info] Replication filtering check ok.
Thu May 26 22:52:31 2016 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking.
Thu May 26 22:52:31 2016 - [info] HealthCheck: SSH to 192.168.1.23 is reachable.
Thu May 26 22:52:31 2016 - [info] Binlog server 192.168.1.23 is reachable.
Thu May 26 22:52:31 2016 - [info] Checking recovery script configurations on 192.168.1.23(192.168.1.23:3306)..
Thu May 26 22:52:31 2016 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/mysql/backup/binlog --output_file=/etc/masterha/app1/save_binary_logs_test --manager_version=0.56 --start_file=mysql-bin.000004
Thu May 26 22:52:31 2016 - [info] Connecting to root@192.168.1.23(192.168.1.23:22)..
Creating /etc/masterha/app1 if not exists.. ok.
Checking output directory is accessible or not..
ok.
Binlog found at /mysql/backup/binlog, up to mysql-bin.000004
Thu May 26 22:52:31 2016 - [info] Binlog setting check done.
Thu May 26 22:52:31 2016 - [info] Checking SSH publickey authentication settings on the current master..
Thu May 26 22:52:31 2016 - [info] HealthCheck: SSH to 192.168.1.21 is reachable.
Thu May 26 22:52:31 2016 - [info]
192.168.1.21(192.168.1.21:3306) (current master)
+--192.168.1.22(192.168.1.22:3306)
+--192.168.1.23(192.168.1.23:3306)
Thu May 26 22:52:31 2016 - [info] Checking replication health on 192.168.1.22..
Thu May 26 22:52:31 2016 - [info] ok.
Thu May 26 22:52:31 2016 - [info] Checking replication health on 192.168.1.23..
Thu May 26 22:52:31 2016 - [info] ok.
Thu May 26 22:52:31 2016 - [info] Checking master_ip_failover_script status:
Thu May 26 22:52:31 2016 - [info] /etc/masterha/app1/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.1.21 --orig_master_ip=192.168.1.21 --orig_master_port=3306
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.20;/sbin/arping -I eth1 -c 3 -s 192.168.1.20 192.168.1.1 >/dev/null 2>1===
Checking the Status of the script.. OK
Thu May 26 22:52:34 2016 - [info] OK.
Thu May 26 22:52:34 2016 - [warning] shutdown_script is not defined.
Thu May 26 22:52:34 2016 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.
MHA啟動及關閉
nohup masterha_manager --conf=/etc/masterha/app1.cnf > /etc/masterha/app1/manager.log /dev/null 2>1
檢查是否啟動：
masterha_check_status --conf=/etc/masterha/app1.cnf
app1 (pid:11447) is running(0:PING_OK), master:192.168.1.21
停止Mha：
masterha_stop --conf=/etc/masterha/app1.cnf
Stopped app1 successfully.
[3]+ Exit 1 nohup masterha_manager --conf=/etc/masterha/app1.cnf > /etc/masterha/app1/manager.log /dev/null 2>1
測試：
說明，每次測試完成后，需要清理/etc/masterha/app1下的日志，然后啟動Mha manager.
1：關閉mysql1上的mysql，查看從庫從那里同步，以及mha日志輸出
2：恢復mysql1為mysql2的slave，change master語句可以在/etc/masterha/app1/manager.log里找到。
在配置GTID復制時候遇到 1032錯誤，用以下方法解決
mysql> show global variables like '%gtid%';
+---------------------------------+------------------------------------------------------------------------------------+
| Variable_name | Value |
+---------------------------------+------------------------------------------------------------------------------------+
| binlog_gtid_simple_recovery | OFF |
| enforce_gtid_consistency | ON |
| gtid_executed | 88b05570-2599-11e6-880a-000c29c18cf5:1-3,
9ee7c7af-cbf3-11e5-bf75-000c2923e459:1-4 |
| gtid_mode | ON |
| gtid_owned | |
| gtid_purged | |
| simplified_binlog_gtid_recovery | OFF |
+---------------------------------+------------------------------------------------------------------------------------+
stop slave;
set gtid_next='9ee7c7af-cbf3-11e5-bf75-000c2923e459:4';
begin;
commit;
set gtid_next='automatic';
start slave;
show slave status\G;
以上這篇Mysql GTID Mha配置方法就是小編分享給大家的全部?jī)?nèi)容了，希望能給大家一個參考，也希望大家多多支持腳本之家。
您可能感興趣的文章:- 如何通過Python收集MySQL MHA 部署及運行狀態信息的功能
- MySQL高可用架構之MHA架構全解
- MySQL之MHA高可用配置及故障切換實現詳細部署步驟
- MySQL 搭建MHA架構部署的步驟
- MySQL 有關MHA搭建與切換的幾個錯誤log匯總
- MySQL下高可用故障轉移方案MHA的超級部署教程
- MHA實現mysql主從數據庫手動切換的方法
- MySQL MHA 運行狀態監控介紹
